FreeBSD in Hyper-V – WORKS!!!

I am so happy – I managed to make it work…
What we need to make FreeBSD run on Hyper-V:

– download FreeBSD ISO image from:
ftp://ftp.freebsd.org/pub/FreeBSD/snapshots/200806
Download this ISO image:
7.0-STABLE-200806-i386-disc1.iso

– create new Virtual Machine using Hyper-V
remove default network card that is added by wizard
– add hardware and chose Legacy network adapter
– start the machine and “mount” ISO image to start booting FreeBSD…
– install it with parameters you want…

– **** NETWORK PROBLEMS **** Even if you are runing DHCP server on your network your FreeBSD machine will not get IP from your DHCP server (my machine did not) so I used ifconfig to add IP and gateway this way:

ifconfig de0 10.70.60.201 – this is IP in my subnet you should use one of your free IP’s
ifconfig de0 down
ifconfig de0 up

You can now chec status of your IP with:
ifconfig

Ok, now we need a gateway to get to the internet:
route add 0.0.0.0 10.70.60.1 This will add your default gateway (for example my gateway is 10.70.60.1)…

try to ping an public IP address to see it is working… As you can see in my screenshots it works for me. 🙂

FreeBSD on Hyper-V [docx]
FreeBSD on Hyper-V [pdf]

*** There is still one problem unsolved for now… If you try to reboot Free BSD, Hyper-V does not Turn off the machine … I am trying to solve that with some Nejc tricks 🙂

11 thoughts on “FreeBSD in Hyper-V – WORKS!!!

  1. manojlovicl Post author

    You can check my newest post regarding this problem… I solved it by using shutdown -p now and then turning FreeBSD up again using Hyper-V manager…
    So do not use reboot or shutdown -r now but “power off” FreeBSD and then turn it back on…

    Hope it helps,
    Luka

    Like

    Reply
  2. Alex

    Thank you, very much! This “reboot failure” was the last unresolved (now resolved!) point before move my FreeBSD to Hyper-V

    Like

    Reply
  3. Josh

    How do you have your host networking set up? I can’t get my guest to work. DHCP works ~50% of the time, but I can’t ping anything from the guest.

    Like

    Reply
  4. Josh

    Oops, spoke too soon. Strangely, even though DHCP gave me an address and default gateway, nothing worked. I went static with down/up and it did…

    Like

    Reply
  5. Sean Stalker

    I found a simple workaround to my FreeBSD on Hyper-V woes! This solution also works for saving hang cause by VSS when running server backup.

    ifconfig de0 down
    shutdown –p now

    Like

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s