http://picasaweb.google.com/manojlovicluka/HyperVServer2008BasicConfiguration
In this photo-slide-show you can see some basic configuration of Hyper-V server. In the last picture there is shown a remote connection with Hyper-V management tool from one of my servers to Hyper-V server.
First of all you will see that Hyper-V server is very similar to Core version of Windows server 2008. To help you with basic configuration Hyper-V server does include somekind of “menu” to do some basic tasks.
🙂 First problem that I see here is… What happens if I close this menu? How I get to it once again? Well… I did not find the answer on the internet as Hyper-V server is just to “fresh”. But I searched the registry and I found where this menu is located:
c:WindowsSystem32hvconfig.cmd
So if you accidentally close the menu you can find and run it from this location.
Next is… Microsoft Hyper-V Server 2008 needs to be managed from other machine with Hyper-V tools installed. But out-of-the-box Hyper-V Server has firewall enabled. Now you have two options. Or to disable firewall or to add ports to remotely manage Hyper-V service using Hyper-V tools (you can manage Hyper-V server from another Windows server 2008 with Hyper-V tools (even on 32-bit edition) or from Windows Vista workstation with Hyper-V tools installed).
To open firwall to allow remote management of HyperV service type folowing line in your Hyper-V Server command prompt:
netsh firewall set portopening ALL 137 “Hyper-V Management”
This allows remote connections from other machines using Hyper-V Manager.
I also like to be able to copy ISO images to Hyper-V server and for this reason you need to open another two ports or enable sharing. I did it in this way:
netsh firewall set portopening ALL 139 “Sharing 01”
netsh firewall set portopening ALL 445 “Sharing 02”
This two ports allow SMB over TCP you can read more on this on:
Has anyone found a way to add drivers to Hyper-V Server after the initial install
LikeLike
Do the drivers have an installer? I needed net drivers after installing Hyper-V server on a Sun X4150. I downloaded the driver DVD from Sun and from the command prompt went to the D: (DVD) drive and ran setup.exe manually.
LikeLike
I am still hunting for where you need to copy the INF’s to if you don’t have an installer. It seems to be really well documented….. NOT!
LikeLike
If you need to install an new inf driver without a setup you can try running the command: Pnputil -i -a
LikeLike
Helo,
I am trying to install Microsoft Hyper-V 2008 R2 standlone on a Proliant but i have an error:the system need the driver of DVD drive.
I need help…
Thanks
LikeLike
HI!
I install Hyper v with windows 2008 r2 , after installation its show’s command console panel, i configure it, but after restart its not show’s GUI base environment , its always show’s console panel, what should i do.
LikeLike
Hi I try to work with hyper-V core and I installed the administration console in other machine, but I have a problem I have my Hyper-V server in one Network and the administration console in other subnet. in this subnet I have the administration console and the SCVMM Server.
The firewall beteewn the two subnets is closed and I have to send only the ports that I have to use but I don´t know wich ports I need to open in the firewall to communicate beteewn host and hyper-v consle and host to scvmm console
do you have a list with all of the ports that I need?
Thanks for your help
LikeLike
Take a look at http://archive.msdn.microsoft.com/HVRemote
LikeLike
This site really has all of the information I wanted about this subject and didn’t know who to ask.
LikeLike